lorenz2512
MrPLC Member-
Content count
15 -
Joined
-
Last visited
Posts posted by lorenz2512
-
-
Hello, you need a programmer to change the adress, new moduls have the adress 0. dietmar -
Hello, forget the Siemenssoft, look here for S5 for Windows, it's much better, you will love it, you can download a demo, you will never change.IBH best wishes dietmar -
Hello, the 8MA03 is newer, some Bugs were killed, if you want to swap a 03 to a 02 there is no problem, but change a newer through a older is possible but critical. -
Hello, i hope i understand you, you want to call sbr0 only 1 time when you switch I0.0 on, try this: LD I0.0 EU CALL SBR_0 good luck dietmar -
Hello, Libnodave is a free software to communicate with PLC S7-200 and S7-300/400 and now you can use it under VB VBA, there are examples for VB and Excel includet. The text is in English. You can download it here:libnodave sorry for my English dietmar -
Hello, there is a getting started PDF for Wincc V5, better this then nothing Wincc in english -
Hello, if you understand german language, you are lucky, here you can find a WinCC Modul Siemens learning Moduls , if you have problems with this, don't hesitate to ask me, i'am a german, and i can translate a lot of this, not all....... Good luck dietmar -
Hallo, please set your question on german plc simatic site, SPS-Forum under Simatic you can set your question in english, help guarantee , if there are any questions contact me. And always: sorry for my english. dietmar -
Hello, look at this: Settings for the "CYCLE" parameter on the controller blocks QUESTION: How should you set the "CYCLE" parameter on the controller blocks for the S7-300/400? ANSWER: The "CYCLE" parameter informs the controller block of the time reference at which the block is called from the S7 program. Example: A controller (e.g. FB41, FB42 or FB1, FB2) is called in the OB35 without conditions. The OB35 has been set to the Time reference 100ms in the hardware configuration. Therefore you must also set T#100ms for the "CYCLE" parameter of the controller. Note: Because of this interrelation, it is not possible to call controller blocks at the OB1 level. The OB1 has no constant cycle time. Thus no specific value can be preset for the "CYCLE" parameter. If the values of the "CYCLE" parameter does not match the real scanning time, then time-dependent control parameters (such as TI, TD) are too fast or too slow. Good Luck dietmar -
Hello, in german it's called "WinCC Information System " there you can find the description of the errors. Here is the description for Code 0180: DRIVER_NOT_INST 384 0180 Der Treiber wurde nicht installiert: Unverträgliche Parameter oder ungültiger Treiber-Handle. Translation of this: there is no driver installed or you have the wrong parameter. Sorry for my english Good luck dietmar -
Hello, SP_INT is a DWORD like MD0 or DBD0, i hope in english it's the same. Good luck. dietmar -
Hello, a very helpfull thing is :Simatic Help Modul it's Modul B6 Converting STEP 5 -> STEP 7 on the german Simatic forumGerman Simatic Forum is the member SPS-Concept, he write tools to convert S5>S7, you can put your question on "Simatic" in english, also the distributor from S5/S7 for Windows(IBH) is there online. You don't need to register, Guest can write Topics. Sorry for my english. Good luck. dietmar -
Hello, you must call FB41 in ob35. Set MAN_ON to FALSE, preadjustment is true.Set PVPER_on to true,preadjustment is false.SP_int is your desired value, in real. A good help is PID CONTROL, you can find it in your SIMATIC orderer. Sorry for my english. dietmar -
Hello, look heresiemens it's the 7. example.
Logo! IO watch programm
in Siemens
Posted