FX PLC controlling E500 inverter

[cghaba 0]

Hi, I have a FX1N PLC with a FX1N-485-BD module and an E520 inverter. I wish to control the inverter using the PLC via a RS-485 serial link. Is it possible to control the inverter its PU connector? Which FX PLC instructions can be used to read and write to the inverter? cghaba

[fae-san 0]

Here is a program that you can use as an EXAMPLE FX1N_v1.0.zip

[Guest Guest]

Hi cghaba! I have posed the sam question a short while ago. I have found very good answers from everyone, especially KDunaikin. The link : Mits controlling E5xx drives cia serial interface! Good luck!