Posted 19 Mar 2018 Hi all, Will appreciate if somebody can direct me to some example or FB that applies control of Winder and Unwinder using NJ PLC. The machine has 1 unwinder (MX2 VFD, diameter sensor 0-10VDC, analog brake 0-10VDC) and 6 winder motors (MX2 VFD, diameter sensor 0-10VDC, tension dancer 0-10VDC -> for each). PLC receive all the signals and manage the calculations then sets to VFD 0-10VDC for speed reference. Thank you in advance. Benny Share this post Link to post Share on other sites