How to Set Up SLC 5/05 and Powerflex 525 with Enet to communicate

[G13N J L 0]

Hi all im really struggling here just wondered if any one has any examples of programming setting up a 505 to talk via Ethernet to a powerflex 525 using an EEM id be very grateful for any advice i have the upto date software and firm ware on the plc

 

kind regards Glenn

  

[Jrichlogix 0]

HI,  you really are going to have a lot of fun with the SLC 5/05 controlling the PF525.  I found a tech note for you to read that shows some examples and explains to some detail.   

 

Go to knowledge base on rockwellautomation.com and search this tech note.   52205  

I home this helps.  

[G13N J L 0]

thanks jrichlogix but do you have the link? iv tried searching but had no joy 

 

my kind regards

[Jrichlogix 0]

https://rockwellautomation.custhelp.com/app/answers/detail/a_id/52205 

[Jrichlogix 0]

Also in a different form there is a discussion on this as well.  you have want to look at this tend as well.  

http://www.plctalk.net/qanda/showthread.php?t=93201

[G13N J L 0]

thank you ill have a look at both by the sounds of it its not going to be easy 

 

kind regards Glenn