CS1W-ETN11 PLC: From PLC getting response as error code

[Sivajothi 0]

CS1W-ETN11 PLC - Communication between PLC and Host computer Program is written in VB.NET. We are able to send and receive message from Host computer to PLC and vice versa. But the response from PLC is not clear for us. Meesage Send from Host computer to PLC as follows: 80 00 02 01 02 00 01 08 00 05 01 01 82 00 00 00 00 44 Response from PLC as: c0 00 02 01 08 00 01 02 00 05 01 01 85 02 00 02 00 44 00 01 00 01

[rlp122 4]

I doubt you will get much of an answer in this section of the forum since this forum is for a different PLC manufacturer than OMRON. You might want to try your post over in the OMRON section of the forums.

[Sivajothi 0]

OK Thanks.