Search the Community

Showing results for tags 'the hmi server in area rna://$local/spring_insertion refused to load its project. the hmi server is not licened and cannot open a project with more than 5 displays'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 51 results

  1. Hello! I have been working with a Factory Talk Studio V8.0 and my computer was crashed, "blue screen". After this, I can not open my panel project anymore, I only get information Failed to open factory talk private directory for the application. How to save my project?  
  2. Hi, I have a a few substations and I´d like to have a local SCADA in each of them. What is the best scada to use with reasonable price? Does anyone know if there is a solution without the need to have a PC for each substation? Thanx
  3. If you’re looking for a SCADA with extensive support for a wide range of PLCs and protocols, check out IntegraXor. It’s robust, feature-packed, and user friendly. The built-in web HMI lets you access your processes anywhere, anytime, on any device. Official Website
  4. Dear Friends,       I want to set my servo controller overload setting as per my machine load requirement since all my servo installed in my machine over travelling and hitting trying to run continuously which is resulting servo failures ,repeated timing belt cut issues.Kindly help me resolve this issue.since i am not familiar with servo controllers.Model used A5 II minas servo MADKT 1507 and contol mode in position control setting.    
  5. load cell SP4M-7Kg

    Hello guys, I have a system of 3 load cells (SP4M-7Kg) attached  to a Micrologix 1500 analog inputs. in the same PLC i have 3 coils for a vibrator, each vibrator is working with signal generators. and the load cells with an external 24vdc Power Supply. i see my load cells readings fluctuating too much even with the vibrator not working. if it is set lets say 70 Grams it is jumping from 68.4 to 74.8 going up an down never never stabilizes in one number, so i suspect am getting noise somewhere put a 100uF capacitor PLC inputs for the load cells but weight just increases more and more. How can realize where is the noise comming? what can i use as a filter? how can i improve this system? should i changed it to digital?   any help welcome! thanks.  questions?    
  6. Anyone with knowledge of a VBA Run-time error '4205'  Can't find the project database! VBA stops at gTagDb.GetTag  Here are some things I already tried.  Cleared the CACHE files in the project.  Deleted .CAC file in TAG folder,  Removed Watcom SQL 4.0 from ODBC User DSN.  Uninstall and Re-install RSView32 Works 7.50 and then upgraded to 7.60.  
  7. Hi everyone, I just want to layout the structure of the question. I have a GOT2000 (GT27* series) that I have hooked up and communicating with an Allen-Bradley PLC. I have established connection and can pull out certain tags values from the PLC program in RSLogix 5000. While I can read the tag values, I cannot modify them (in certain conditions).  So let say that I have a User-Defined Structure named "Smoke_Detector" and here are it's available members: Smoke_Detector:   - ALARM (BOOL)   - ON_TIME (DINT) * DINT in Allen-Bradley but Signed Binary 32   - Battery_Life (REAL)  My question is that while I can read and display the tag and its members through the following:   - LAMP for Smoke_Detector.ALARM   - Numerical Display for both Smoke_Detector.ON_TIME and Smoke_Detector.Battery_Life But when I tried to modify the values via a Bit Switch or Numerical Input, it does not operate on them.  However, if these tags are members are just standalone tags, meaning that they are not within a UDT in RSLogix 5000, then I can operate/ modify them just fine.  Here are the things that I have tried: * Making sure that the permission are set to Read/ Write in RSLogix 5000 * Making sure that the tag definition in GT Designer 3 follows the structure where @[channel]:[Network #]:[Station #]::[Tag instance and member (e.g Smoke_detector is the instance and Alarm is member] Any possible insight and input are appreciate! 
  8. Hey guys,   I have worked on the FTView ME platform many of times.  I am now working on a FTView SE (Local Station) application, and I am having trouble connecting an Offline .ACD file to my program so that I can design.   If someone could help me with this it would be greatly appreciated.   Thanks in advance!
  9. Hello everyone! I am new to Eplan, and I am working on a big project on which someone else has worked on before me and almost finished it, but with a lot of technical mistakes and missing peaces. My boss expects me to fix a lot of things, but I have no experience with this software, so I could use some help. The problem is that no revision information (revision date, description, approved by etc) is displayed in this project, and I don't know how to make it appear, and be correct. I have made changes in plot frame and added special texts which should display these data, but I don't know where should I define wanted information (for example, I put special text for "approved by" but I can't seem to find adequate place to write the name of that person)? And, is there a way for Eplan to generate automatically revision description, based on the changes I made? From all said, it is obvious that I have no idea at all how revisions work, so any help would be enormously appreciated Thank you in advance! Cheers
  10. ab

    The HMI server in area 'RNA://$Local/Spring_Insertion' refused to load it's project. The HMI server is not licened and cannot open a project with more than 5 displays
  11. Logix 5000, Array filling

    Hi there! I have a question with AB PLC. My problem:  I have some raw data...distance for example.When the machine starts,the sensor begins to send the information with the distance values. When data is received it is moved into an array. After the first 5 values the program calculates an average and the result is moved into another array.Currently after receiving the fifth value,thus filling the first array,making the calculation and sending the average to the other array,the program empties the entire first array instead of just always discarding the oldest value of the five,and recalculating the average with the newly arrived value every time. I tried to made this with ladder diagram using an an fifo load and unload but isnt working. Please help me if anybody can. Thank You.
  12. Hello All,   I am would like to know how to send a bit from an excel file to an omron PLC through CX-server in order to confirm that I have communication and the excel file is open.   At the moment I am reading data from the PLC on the Excel file no problem but I don't know how to do it on the other way.   I am attaching the code I have written and the excel file. So the idea is having a cell with a 1 and reading this value as a bit ON on the PLC.   Thank you very much in advance I really  appreciate it. :)    
  13. Hello All,   I am having some issues with Excel while communicating with the Omron PLC. The Excel file is getting the data from the PLC and the macro doing what I want to do, but I am getting the following error messages when opening the excel file.   I am attaching the pictures of the messages and the code where debug send me.   Thank you very much in advance
  14. Version 2.0.2

    232 downloads

    free HMI/SCADA program WebN Server 2.0 (freeware) * manual & program download site : http://www.netran.co.kr * Web-N Server 2.0 (freeware) - PLC interface demo video : https://youtu.be/MuOFMwK7Qqs* Android phone app download : https://play.google.com/store/apps/deta ... .en2&hl=en- Windows 7/8/8.1/10 x64, .NET frameworks 4.6 over  - Mult-Language (tool language, view page language)  - PC monitor, Web browser monitor, Smartphone monitor - (Design once and monitor on multiple instruments)   Unlimited number of tags    Unlimited monitoring time    1,024 concurrent connections    Unlimited upgrade    Unlimited connection of       equipment (PLC, DCS, DDC ..)    Unlimited app push message   No Software fee    No installation cost    No registration fee    No license fee    No cost to use    No upgrade cost    Free Redistributable      
  15. free HMI/SCADA program Web-N Server2.0 (freeware) View File Program download site : http://www.netran.co.kr   Web-N Server 2.0 - video for PLC interface demo : https://youtu.be/MuOFMwK7Qqs   - Windows 7/8/8.1/10 x64, .NET frameworks 4.⁠6 over - Mult-Language (tool language, view page language) - PC monitor, Web browser monitor, Smartphone monitor   (Design once and monitor on multiple instruments)   Unlimited number of tags Unlimited monitoring time 1,024 concurrent connections Unlimited upgrade Unlimited connection of equipment (PLC, DCS, DDC ..) Unlimited app push message   No Software fee No installation cost No registration fee No license fee No cost to use No upgrade cost Free Redistributable =============================================== Submitter webn Submitted 08/29/17 Category Free Utilities
  16. I am currently using a Kinetex 5500 Servo Drive with a VPL Motor and its has vertical load attached to it. My problem is even after setting my Brake Enagaged time to 0.01s it drops like a dime. I had made sure that I kept my Servo STO enable for 5 second before MSO is shutoff and MSF is engaged. Any ideas on what I am doing wrong? Attached is an action parameter settings for brake control.
  17. Hi All,  I was wondering if any of you guys could help me about improving my load sharing application. At the moment it's very unstable and i can't see what i am doing wrong! Thanks.  Details: I am trying to run a industrial chain conveyor using Torque control by Real sensorless vector control function of A700 Mitsubishi VFD. I have been following "Technical Note" which is provided by mitsubishi (see attached PDF).  As described on technical note, i am trying to control 5 motors ( 1 X 2.2kW, 4 X 1.1kW) to share the load on this chain conveyor. Torque command (SV) and Motor Torque (PV) read from Master VFD and PID output (MV) of Q03UDE transferred to Slave VFDs over CC-link. i would appreciate any information and help you can provide, Many Thanks.  Application_Technical_Note_Load_Sharing.pdf
  18. FT View Site Edition v.8

    I have been tasked with pointing our FT View application to a remote SQL server for all data logging.  I'm having some issues getting this to happen.  I've configured everything I can find in our test environment, but FT View still points to the local SQL Server instance.  There must be a setting I'm missing.   For instance, when i go to Tools -> Diagnostics Setup -> Destination Setup -> ODBC Database, and I point to the system DSN I've created pointing to the remote server (and even enter the correct remote credentials), when i create a table, it goes to the local sql server instance... I've restarted multiple times.   Any direction would be appreciated.
  19. In general, this control PLC program is written in GX Works. I did a simple visualization on TIA Portal v14 (WinCC RT Advanced) and I would like to now test it on Mitsubishi FX3U driver with ENET Module. I do not have much experience in this kind of thing, I'm still learning. I know that someone previously made a visualization in LabView and downloaded the tags from the PLC using NI OPC Server. Someone also did visualization in iFix and also downloaded tags through server opc. I do not know just how or what program to download tags in PLC so that I can no longer use it in visualization in TIA Portal. Unfortunately I still have a connection problem. The driver is connected to the router. From the connection options with RT Advanced I chose in the connections tab Mitsubishi and entered the appropriate IP. Still nothing. I do not know if the lack of a connection can be related to a virtual machine (VM Vare Workstation 12) on which I have TIA Portal installed. The driver pings but can not connect. I also tried using KEPServer EX to connect and unfortunately also failed. (I have information about the can not connect). Anyone know what program I should use? or had contact with such a problem? I attach a photo of communication from my station to more visualize the problem. Thanks  
  20. I have an application in the Visu+ Scada System, from Phoenix Contact, which makes a query in the SQL Server 2014 database. While the database was empty, queries were made perfectly, after 4 months the database grew up absurdly and then stopped running the query, returning the following error: Query timeout exceeded. I have a general table with 210 variables being written every 20 seconds. The query is made by updating the parameters in another single row table, it generates a trigger that copies the requested query to a third table and it is plotted on a chart in the supervisory system. The error occurs when Visu+ sends the parameters to be updated in the second table, returning "Query timeout exceeded.". However, when I update directly through SQL Server, it updates, generates the trigger and performs the requested query. Could someone help me solve this timeout problem, please? Thank you very much in advance!!
  21. Step7 on remote server

    Hi, I was wondering if anyone have experience with Tia Portal Step7 v.14 and Step7 Classic v.5.5 located on a remote server? We have several persons working on our PLC's. As it is they all have their own PC with Step7 + licenses. We were thinking about moving the software environment onto a server to reduce license and maintenance costs. Does anyone else have this setup? If yes do you have any tips or comments? Pros/cons? I already know now that you cannot autodetect/configure new devices from a remote server as the Step7 detection protocol doesn't work through a router. We can live with that. We need both TIA Portal and the Step7 Classic on the same server. Thanks
  22. GE IFIX Server Client connectiom

    I want to make a setup of one Ifix 5.5 server and  one Ifix  5.5 client for testing purpose.  This is for doing some alarms and events testing at the client( Operator Workstation) end. My question is that is it possible to do this setup without a valid license. Is it possible to establish the connection between server and client without license..? Regards Eby
  23. Hello We have a HP ProBook 650 G1 with Windows 7 Professional 64-bit and when im trying to install Sysmax Studio 1.14 it all goes well untill I get to the CX-Server part. The installation always stops there and I dont get any usefull information from the event viewer. Myabe, just maybe, it might have to do with Bluetooth, a couple of times I get an event about the process "devmonsrv.exe" and how it failed to start. But this event doesnt always appear so it might just be an coincident. The installtions halts when he does something with the "OmronZipItWnd.exe" file. Have anyone of you have had problems with installating CX-server on a HP machine running Win7?   Regards Niklas
  24. I am experiencing a serious problem. Everything went fine in my project for month. Yesterday when I "Transfer to Controller" (like I use to do several time a day) I got this Message : "Build is not complete. Process was aborted". So I build again, I Rebuild controler, I restart SysmacStudio, restart the computer, reset the hardware on the project ... nothing worked. Always the same message. So I opened a previous version of my code. Since it was allready built when saved, I had no problem transfering it in the controler. However, the moment I change a line (have to rebuild) on this backed up version... same problem appear. I finally got to the "output windows" (Alt+3) where I saw ALL build are failed. I've contacted my Omron representative and he is trying to help but he seem as lost as I am. Please help if you can, I am using Sysmac Studio 1.13 on Windows 10. I also have a HMI wired to the project and everything work fine with it.  
  25. SIEMENS S7 STATION

    Dear All, I am very new to S7 PLC programming (S7 Simatic Manager v5.5) and I wanted to know how to back-up a system consisting of multiple PLC Stations (S7-1200, S7-300, etc). I am able to upload station to PG but that will save only per station. How about saving the whole system? I am not sure if i am using the right terminology. As you can see, I was given a zip file for the S7 project and it contains the whole system. I am trying to see how the commissioning engineer was able to do it (don't ask why I am not asking him instead). How can I then use this project file to download the program to the PLC/system once I decide to restore. I am at loss and have been searching for references over the internet. Uploading and downloading per station is no problem. I cannot seem to know how to do it on multiple stations system. I hope I have made some clear question or somehow you have managed to understand it.  TIA.