5618

MrPLC Member
  • Content count

    3
  • Joined

  • Last visited

Everything posted by 5618

  1. Controlling heater element with PWM

    You could probably make your own. I would be surprised if you had a thermal mass to heat energy ratio that required heat cycles as fast as 200Hz. Have a cycling timer of a few seconds or whatever timebase works for you. Multiply 0-100 heat PID output by units that make 100% the full cycle time. If this value is less than timer accrued value, energize output. You should have a SSR or similar firing the heater. Mechanical contacts would burn up quickly.
  2. My guess for RCAS is Resistive Capacitive Arc Snubber - used to dissipate coil collapsing magnetic field energy to extend life of contacts.
  3. Looking for PanelView suggestions

    If it’s likely to get water spray and these are the choices, I would choose the 6. The display is replaceable while keeping the logic module. I've replaced several screens in a washdown environment. A logic module hasn’t failed yet. A display swap is quick and easy. I would choose the 7 for a dry or damp area. The plastic cam locks seal the unit to the panel well enough, but I don’t perceive it as secure as the screw clamps of the 6. It’s the current model and cheaper. A backup of the application on a USB stick can be copied to a new unit, provided the firmware version matches. If you’re new to FactoryTalk View for this, I expect you to quickly develop a strong dislike for it. I’m getting used to it now but it really makes me appreciate others. Consider proposing a PV800 as an additional cheaper choice to the customer, especially if using a ML1400. I like it as a simpler cheaper alternative to 6/7 where it can be used. It’s developed with free CCW. Unfortunately the largest size is 10.4”. It doesn’t have all the features like parameter passing but for simple I/O interface I think it’s great. Know how you want to connect, serial or ethernet when ordering. Either works fine. Second guessing myself...the 6 doesn’t withstand direct spray very well. Maybe the 7 would be better?