Anthony0307
MrPLC Member-
Content count
15 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by Anthony0307
-
Hi Folks, I need to change the Communication protocol from DF1 to ETH-1 Ethernet in a RSLogix5000 program. Any idea how this is done. Thanks Anthony
-
Hi folks, I'm trying to communicate with an old CompactLogix L35E via Ethernet. I have already establish communication via DF1 Serial port and was able to go online but I Do not know the IP address to communicate via Ethernet. Can someone please tell me how I could determine the IP Address or create a new one ? This Controller was remove from a working machine. Any help will be highly appreciated. Thanks, Anthony.
-
ETH-1 Ethernet Protocol
Anthony0307 replied to Anthony0307's topic in Allen Bradley / Rockwell Automation
Thank you guys!!!! I got it... -
Hi Folks, I need to change the Communication protocol from DF1 to ETH-1 Ethernet in a RSLogix5000 program. Any idea how this is done. Thanks Anthony
-
ETH-1 Ethernet Protocol
Anthony0307 replied to Anthony0307's topic in Allen Bradley / Rockwell Automation
ETH-1 is active in RSlinx but the RSLogix5k shows Path AB DF1 -
Need to change the path from DF1 to ETH-1 Ethernet. Any idea. Please look at attached pictures.
-
I got it!!! Thanks to everybody. But I'm having problem going Online. I need to change the Path from DF1 to ETH-1 Protocol. Any idea how this is done? Thanks, Anthony!!!
-
Can someone help me on this, please. Thanks! Anthony
-
Hi Folks, Here are the steps I'm using trying to communicate via Ethernet; As I explained before, this is an old CompactLogix 1769-35-L35E that was removed from a working machine. I'm able to communicate using the serial port but I have not success using ETH1-Ethernet. On the Controller, Tree I click on the Controller Ethernet card then properties and type in the IP I want to use, 192.168.1.10, my Computer IP is 192.168.1.6. Then I opened RSLinx , on the Host window I type again 192.168.1.10 but RSLinx is not recognizing this IP. Then I tried to Ping 192.168.1.10 but the destination Host is unreachable. Please look at the sequent below. Thanks in advance for all your help. Anthony
-
Hi Folks, Can someone help me with this topic, please. Any help would be highly appreciated. Thanks Anthony
-
Hi Daniel, Thank you for your help. I'm still having problems communicating with the controller via Ethernet. This is what I did; I opened RSLinx, configured DF1 driver and established communication via RS-232. From the Controller tree, I changed the IP address from 10.10.50.131 to 192.168.1.10, my computer address is 192.168.1.6. I deleted the DF1 driver and configured Ethernet devices driver, then I added the controller IP on the Host name but the RSLinx is giving me Unrecognized Device. I also used BOOTP-DHCP and ping the Controller IP with the same result. is there something I've been missing? I appreciate your help on this topic. Regards, Anthony
-
Hi Daniel, I opened the RSLinx Classic, selected the CPU/Ethernet Module and the the current IP Address is 10.10.50.131, and my Computer IP Address is 192.168.1.6, subnet 255.255.255. 0 but I still can't communicate. Any help would be appreciated. Thanks, Anthony
-
Hi Folks, I'm trying to establish communication with a CompactLogix L35E. I removed this processor from an used machine and I do not know the IP address. My Computer IP is 192.168.1.5. How can I establish communication? Any help will be highly appreciated. Thanks, Anthony
-
Hi Folks, I'm trying to establish communication with a CompactLogix L35E. I removed this processor from an used machine and I do not know the IP address. My Computer IP is 192.168.1.5. How can I establish communication? Any help will be highly appreciated. Thanks, Anthony
-
Hi Daniel, Thank you for the quick response. I was able to communicate using serial port USB-SR232 cable but I would like to communicate via Ethernet. The processor is blank, no original machine program and I do not know the subnet range on the processor. Best regards, Anthony