Guy

Two thumbs up

I want to modify a program and write another one on a machine that as an L02 PLC with a GOT 1000 HMI all connected via ethernet on the same network as my laptop is. I can write lines but when I want to compile them, it seem's that I am online with the machine all the time. Is there a way to work on my program without having to transfer everithing I wrote to the PLC ? Guy

We have a machine controlled by a CJ2M ( CPU 33 ). I want to connect a Microscan Vision Mini with a DB15 to the CJ2M DB9 ( CIF01 ). Does anyone now the pinout. I am confuse with what I read. Guy

We have recently receve a machine fron China controlled by 2 S7-200 CN PLCs, I am not familiar with Seimens material. My question is : can I hire an integrator with the American version of the Seimens program to upload a copie of the ladder in the plc? Guy

I am trying to connect my pc with an L02 serie CPU using MX Component ver. 3.12 And I cannot locate the L serie CPU in the menu, I just bought this program but I cannot connect. Any advice? Guy

Right on the botton I found the spot thank's a lot I will make the change after having format the memory. Guy

Is there a way to change the munber of steps reserve for online edit space? Guy

At the end of the day yesterday I format the plc memory via the online data operation and this morning I upload my program and everything seem's A OK. One thing, Im not so use to work With Mitsubishi, so when I say Program I mean The '' ensemble '' of the job to be executed by the PLC, in this program I have 14 sections witch are called program in mitsubishi and intend to create 62 yes 62 others for the rest of the operation. I gess I will have problem. Guy

If I '' clear '' the memory and '' write '' the parameter and program, than will all the setting be remove? Guy

I hope this work ( the upload ) Guy25 01.bmp

I Sparky I work in ladder an I have GX Works2 Version 1.55H Guy

I am using an L02 serie PLC with an L77mh4 controler and a CClink module. I have what I know is a small program that I try to transfer to the cpu via ethernet. I want to write the program file ( not parameter + program ) amd I receve This message: Exeeds capacity of the specified drive. check drive ccapacity, then execute again. < ES:010a41cf >. I realy puzzle by that error Guy