C200H-LK201

[dg01 0]

Can someone give me some hints how can I establish communication through the PC rs232 port and a C200H-LK201 V1 module mounted on the backplane rack of a PLC C200HX CPU44. I need to upload plc program using CX-programmer to monitor and edit online the program. (Available CPU rs232 ports are already occupied so the alternative was the C200H-LK201) I have cable C500-CN221-EU but I don't know the setting for the CX-programmer and C200H-LK201 module. Thanks in advance for any help given. Edited 14 Jul 2006 by dg01

[gtsuport 61]

Here is a link to the manual for the C200H-LK201. You will need to set the rotary switches on the front correctly. Also, check the cable diagram in the manual. C-Series Rack Mount Host Link Module Manual Hope this will help.

[Jay Anthony 118]

Check out the cable and the switch settings. Then use Auto On-Line with CX programmer. C200H_LK201_and_RS232_comm_with_LSS__and_SCADA_.pdf

[JeffB 0]

And 9 years later, this same situation has risen again. The "C-Series Rack Mount Host Link Module Manual" link isn't available. Can someone repost another link? Thanks!!!!

[Jay Anthony 118]

It's in the Download section of this forum, http://forums.mrplc.com/index.php?app=downloads&showfile=954