1746sc-ctr8 Help

[Eagle Eye 0]

I am looking at doing a program using micromotion mass flow meters and the spectrum controls 1746sc-ctr8 verses the 1746-hsce2 card.Has anyone here had any experience with this card? I seem to have difficuty programming hsce2 and was wondering if the spectrum card is any easier.If anyone has any sample programs using the spectrum card I would really like to look at them.

[Ken Moore 23]

I have used the 1746sc-CTR-4 many times, and with MicroMotion mass meters most of the time. I much prefer the Spectrum card to the HSCE. I highly recommend it. If you have specific questions, post them and I'll do my best to answer. I took an old program and stripped everything but the meter logic out, this should give you a good starting point. CTR.RSS

[mgvol 0]

Never used one personally, but Spectrum Controls has an example paint filling application using a MicroMotion coriolis meter here: http://www.spectrumcontrols.com/FLOW_METER_APPLICATION.htm The users manual is here: http://www.spectrumcontrols.com/pdfs/abio/...0300181_05G.pdf This page contains a ladder logic sample, EDS file, and Firmware downloads: http://www.spectrumcontrols.com/downloads.htm

[Eagle Eye 0]

Thanks for the info .I am sure i will be back with more questions as i figure this all out.