CX-Supervisor

[fgcastro 0]

I am getting the following message in the Error Log Window: TIMEOUT/other communication error: PLC3, [CX-Server:DEVICE, COMMS_FAILED, 0X8A1B]. How do I go about solving the problem ? where do I start ? Thank you for your help.

[PdL 71]

Forward this information to your local Omron tech support, they will be able to tell you more by the error code 0X8A1B.

[Guest anonymous]

Hello fgcastro, Code 8A1B means exactly what it says in the error message. You have a communications failure / timeout between CX-Supervisor and the PLC. Check that the PLC is powered up. Check cabling to the PLC is OK. Check the communication settings for that PLC are OK. Ensure a large enough timeout setting within the Network Settings dialogue. etc, etc... Hope this is of some help Regards anonymous

[tashinz 9]

you can also use error code converter in error log window. you just copy and paste error code and you will get description.