Posted 9 September Hello I have project where I will be use EXLAR roller screw and UNIMOTION ball screw actuator like FTP, PNCE for module of servo press with controler NX1P2 and serwo 1S. I started instaled SYSMAC XR-013 Servo Press Library (https://www.ia.omron.com/data_pdf/cat/sysmac-xr013_p112-e1_2_3_csm1052873.pdf?id=3459) I have completed, connected and launched an evaluation kit containing a 1S drive and motor, an NX1P2 controller, a PNCE mechanical actuator with a force sensor. Does anyone have experience using this library? I am trying to use it, but the OMRON documentation for this library lacks explanations and configuration examples. I am ready to connect online (e.g. Anydesk) to launch and test some of its functions with someone who knows this library. WBR,COVIS.PL Share this post Link to post Share on other sites
Posted 23 November (edited) Hello, I just got around to getting the servo press functionality up and running using the Omron SYSMAC XR-013 Servo Press Library. Assumptions The main goal is the modularity of the servo press system, which allows for the construction of both a stand-alone individual device and the installation in a complete machine or production line, as one of its functional parts, e.g. an element pressing station in an assembly machine with an automatic rotary table. In addition, the use of a ready-made control system eliminates the need to program the technological functionality of the servo press in the machine or production line controller. We parameterize data exchange via a communication interface, e.g. Profinet, Ethernet/IP, Modbus and I/O (StatusWord, ControlWord, Data). If anyone is interested, they can contact me. Below is a link to my video, where I show some basic servo press functionalities. https://www.youtube.com/watch?v=hWwSQRoh2ZYhttps://www.linkedin.com/feed/update/urn:li:activity:7262172603165929473/http://www.covis.pl Edited 23 November by Covis 1 person likes this Share this post Link to post Share on other sites
