Posted 18 September (edited) hi, I'm trying to find out what kind of HMI panels can be used for a LOGO!8 ethernet plc. are panels from simens that can be used... they are a bit expensive Edited 18 September by Kim Jessen Share this post Link to post Share on other sites
Posted 19 September Logo isn't really a PLC, it's intended to be a programmable relay. A PLC would have more options for HMI. I do not recall anyone other than Siemens making a small one to talk to Logo. Share this post Link to post Share on other sites
Posted 21 September Morning, Weintek panels can communicate with Ethernet Siemens Logo. They're cheaper than Siemens hmis even if KTP ones are not so expensive than that and work with Logo too. http://dl.weintek.com/public/PLC_Connect_Guide/Siemens_LOGO_Ethernet.pdf JC Share this post Link to post Share on other sites
Posted 21 September If you use LOGO!8 for V8 or later it can be set communication to be Modbus TCP Server then you can use any HMI Touchscreen that can use with Modbus TCP connection. 2 people like this Share this post Link to post Share on other sites
Posted 21 September 2 hours ago, Wasan said: If you use LOGO!8 for V8 or later it can be set communication to be Modbus TCP Server then you can use any HMI Touchscreen that can use with Modbus TCP connection. Good to know... haven't had the chance to use one in a few years... 1 person likes this Share this post Link to post Share on other sites
Posted 23 September (edited) On 21.9.2023 at 0:39 PM, Wasan said: If you use LOGO!8 for V8 or later it can be set communication to be Modbus TCP Server then you can use any HMI Touchscreen that can use with Modbus TCP connection. Ok.. i bought a rs pro hmi panel.. but i can't get it to work.. can you help with some link to a youtube.. I have studied this video but I can't get it to work. https://youtu.be/aHVdsKyDPP0?si=XHm4jFyBz8s3Kzlv + I also have this document.. but it doesn't really make sense... at least it doesn't work.!! https://docs.we-con.com.cn/bin/view/PIStudio/PLC%20Protocol/Siemens/#HLOGOEthernet Edited 23 September by Kim Jessen Share this post Link to post Share on other sites
Posted 24 September 17 hours ago, Kim Jessen said: Ok.. i bought a rs pro hmi panel.. but i can't get it to work.. can you help with some link to a youtube.. I have studied this video but I can't get it to work. https://youtu.be/aHVdsKyDPP0?si=XHm4jFyBz8s3Kzlv + I also have this document.. but it doesn't really make sense... at least it doesn't work.!! https://docs.we-con.com.cn/bin/view/PIStudio/PLC%20Protocol/Siemens/#HLOGOEthernet Ask the HMI manufacturer for help, if they have doc's how to make the connection. Share this post Link to post Share on other sites
Posted 24 September 40 minutes ago, Hati said: Ask the HMI manufacturer for help, if they have doc's how to make the connection. yes.. they sent me the 2 things the movie and the pdf file Share this post Link to post Share on other sites
Posted Wednesday at 3:47 PM @Kim Jessen Do you need to connect PLC LOGO!8 to RS Pro HMI by ethernet connection alright? RS Pro HMI seems use Wecon PIStudio Software for configuration. On your example video is configured with S7-1200 with S7 connection. For use with LOGO!8 they can use with S7 connection too by compare LOGO!8 variable to be in DB1 like this link https://www.promotic.eu/en/pmdoc/Subsystems/Comm/PLC/LOGO.htm but you need to familiar with TSAP Local / Remote setting I recommend to open Modbus TCP Connection on LOGO!8 then use Modbus TCP driver on RS Pro HMI is easier to connect it. Share this post Link to post Share on other sites
Posted Thursday at 8:33 AM Hi everyone.. thanks for your input. I have given up and taken a different angle of attack.. I have invested in a s7-1212C plc. there I got connected. so that's where I continue. if someone comes up with a brilliant solution for the LOGO module, I think more people will be happy. but right now it's beyond my abilities. Share this post Link to post Share on other sites
