Fanuc R30ib plus ethernet i/p

[wdrake21 0]

Hello I'm trying to connect a r30ib plus to a nx1p2 with ethernet ip. Every eds file I try will not load into sysmac studio anyone have any ideas.

[pturmel 157]

Share the EDS files, please.

[photovoltaic 120]

When in doubt use the generic Omron EDS file and manually enter the instances and sizes. This will cause the PLC to ignore any major/minor rev mismatches among other things. I rarely see an EDS file get rejected by Sysmac however; I'm with @pturmel on this one - please share.

Generic Omron EDS file:

https://forums.mrplc.com/index.php?/files/file/1036-omron-generic-ethernetip-eds-file/