PanelView component with PLC5

[omar_zdn 0]

Dear All

Can I use panelview component (2711c-t6t) with PLC5 (1785-L40E) via RIO?

 Thanks

[pturmel 157]

It definitely cannot use RIO.  Nowhere in the docs does it show support for any PLC-5 devices.  Just SLC and MicroLogix.

[omar_zdn 0]

Thanks so much.

[BobLfoot 301]

14 hours ago, pturmel said:

It definitely cannot use RIO.  Nowhere in the docs does it show support for any PLC-5 devices.  Just SLC and MicroLogix.

Not to disagree venerable @pturmel but using CCW version 13 it says I can setup the 2711C-T6T for Protocol = Ethernet | Allenbradley SLC/PLC  and Controller Type = PLC5.

So while you can't do RIO it appears it will do ethernet to a PLC 5.

That Said @omar_zdn I don't have hardware or emulator to conduct proof of concept.

[pturmel 157]

5 hours ago, BobLfoot said:

venerable

!!

Hmm.  Good word.  Old but experienced. (: