Omron NQB HMI and Micrologix PLC Question

[Hot Rod 0]

Hi Guys I am new to this form .

I was wondering if anyone had information regarding the following . 

I have a micro logix plc and a Omron NBQ-TW01B display 

The Allen Bradley plc will have a address as follows b3:3/5   how do I enter this into the Omron NB Designer Variable table . Mean how do I enter that address in the omron side .

Thanks for your time .

[BobLfoot 301]

@Hot Rod welcome to the mrplc forum.  I've moved your post from the AB Forum to Omron Forum as it is more about how to use an Omron piece of Software than anything Allen Bradley Rockwell.  The Omron "experts" here will chime in with suggestions very shortly I am sure, but in the meantime let me ask the obvious.  Do you have the manuals for the Micrologix and the NQB and have you tried what is suggested there.  Trying something and posting your failure will get you more responses than just asking, "solve this for me"

[gtsuport 61]

Right click on the PLC.

Choose change PLC model. 

Attached dialog should pop up and you can set the NB memory areas.

gtsuport