cutting position adjustment

[4w@rd 0]

I have motorized film adjustment and I was experiencing unstable cutting position during machine startup (acceleration) and stopping (deceleration). I have no problem during constant speed. Do you have any idea to fix the unstable cutting.

[Gambit 324]

Maybe you should tell us what system you are using !!!

[BobLfoot 301]

Until you can share some design details of your system there are too many variables to suggest a firm solution.

Most Film Cutting Systems I have worked with fall into one of two types.

Type A - Film is printed with a Registration Mark which the automation recognizes and the cut should be "X" mm from the registration mark.

Type B - Film is not printed or printed with ambiguous data and the cut simply every fixed distance {100 mm} as measured by the automation.

Without knowing this one variable we could propose the wrong answer to you.