Posted 18 Jul 2022 Hello Experts Can someone please guide on how to create message for operator on HMI We have GX DEVELOPER 2 AND GT DESIGNER 2000 with us along with PLC and HMI backup Share this post Link to post Share on other sites
Posted 19 Jul 2022 What do you want to happen. Sounds like you just want to have a windows screen pop-up Share this post Link to post Share on other sites
Posted 21 Jul 2022 Thanks for your response Gambit We need to have message on HMI for operator after say every 20 cycles, to clean up torch in MIG welding application, similarly to cut wire before resuming after power cut because if that is not done, torch gets bent during homing cycle Share this post Link to post Share on other sites
Posted 22 Jul 2022 ok just create some window screens with those messages. (and a close window button) Now go to the system tab => enviromental setting => screen ..... change the overlap window device to a PLC register or add a second one. Now from the PLC mov the nr of your window screen to that device and the window screen will appear Share this post Link to post Share on other sites