Posted 13 Jul 2022 (edited) Hello Everyone, I hope everyone is always given healthy I'm using an FX5UC-32MT/DSS plc, and I see it has a built-in CC-Link IE Field Basic. I want the plc to communicate with the remote output module. I have done hardware settings on NZ2GFCF1-32T, with station no. 1, rear SW function AUTO PRM = ON, in software settings, on my CC-Link IEFB Configuration the "Detect Now" feature NZ2GFCF1-32T is not detected in CC-Link IEFB Configuration, and I am using CC-Link IEFB Module (General) for NZ2GFCF1-32T. LED for DLINK and LED ERR OFF FX5U IP : 192.168.135.20 (master) IP NZ2GFCF1-32T : 192.168.135.1 Can the Build-In Feature on the PLC communicate with the NZ2GFCF1-32T? Do I need to add a module as master? Best Regard Edited 13 Jul 2022 by Chelz96 Share this post Link to post Share on other sites
Posted 14 Jul 2022 Sorry, this combination is not possible. The FX5 series CPU's does not handle the required CC Link IE Field communication for this IE Field remote IO module ( NZ2GFCF1-32T, 1Gb networking) The FX5 CPU can handle directly from the CPU, CC link IE Field Basic remote I/O stations like: NZ2MF2S1-32D (100Mb networking) Share this post Link to post Share on other sites