Rusyaidi

Modbus TCP Server

2 posts in this topic

Hi everyone, I'm using Modbus TCP Server for CP2E to send the data from PLC to network server. the IP address set is 10.39.15.200. When I go online and download, the function block cannot established since there is no response from the (BOOL) established. But there is one time suddenly the FB can be connected & established and then after repeat again it is not connected until now. After doing a cross check in the function block, I found that it is due to the TCP Status connection but I have no idea how to solve this issue. Need an opinion and help, thank you.

MicrosoftTeams-image (3).png

Edited by Rusyaidi

Share this post


Link to post
Share on other sites
52 minutes ago, Rusyaidi said:

Hi everyone, I'm using Modbus TCP Server for CP2E to send the data from PLC to network server. the IP address set is 10.39.15.200. When I go online and download, the function block cannot established since there is no response from the (BOOL) established. But there is one time suddenly the FB can be connected & established and then after repeat again it is not connected until now. After doing a cross check in the function block, I found that it is due to the TCP Status connection but I have no idea how to solve this issue. Need an opinion and help, thank you.

MicrosoftTeams-image (3).png

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now