Wonderware In Touch Alarm summary

[loly 0]

Hi All,

I need a technical support regarding Wonderware In Touch alarm summary.
We generated the high and low alarms for the transmitters in alarm summary.

In Tagname dictionary,
The alarm state is on. The alarm events are only logged the on status in alarm viewer control.
The alarm state was off. The alarm events are only logged the off status in alarm viewer control.

But in alarm DB viewer control,

It generates both on and off alarm status in alarm summary. I need to show the only on status of the IO’s in alarm summary alarm db viewer control .

How to filter the on status of the alarm summary in alarm Db viewer control. Herewith I have attached the image file for the alarm viewer and alarm Db viewer control for your reference.

Our scope is to show only the On status in alarm dB viewer control with backup.

Here I have attached the image file for the status of alarm summary. In that, two alarm present in that window. First alarm represents alarm DBviewer control. Second alarm represents alarm viewer control.

Kindly guide me.

Thanks,

Loly