Posted 16 Jan 2022 (edited) I have a old PannelView 550 that have lost the screen so i would like to hear if there is any possibilety to get it working using a PannelView 800 7" and logix 5555. I only have serial rs 232 in the plc. Thank you in advance. Peter Jensen Edited 16 Jan 2022 by Peter Jensen Share this post Link to post Share on other sites
Posted 16 Jan 2022 (edited) Welcome to the Mr. PLC forum community ! Do you have the PanelBuilder32 file ? Was the PanelView 550 connected over RS-232 to the Logix 5555 ? Examine the Tag database closely and see if it uses any data types other than N, B, and F. Those are the three kinds of data files that a ControlLogix can emulate perfectly, using the PLC/SLC Data Table Mapping tool. If it uses other data types, you will have to adapt the PanelView application and possibly the ControlLogix application. Edited 16 Jan 2022 by Ken Roach Share this post Link to post Share on other sites
Posted 21 Feb 2022 Thank you Ken Yes i have the code. Please see: PV 550 Logix 5555 I think the files is mapped in logix 5555 Thank you Peter Jensen 86_upload_11_1_22.PVA S86_0645_90_000.ACD Share this post Link to post Share on other sites