Mapping of Devicenet HMI tags to PLC tags

[Newbie123 0]

I'm currently migrating panelbuiler32 to factorytalk view project running in a laptop. Panelbuilder32 (panelview 600) use Devicenet communication but now, factorytalk view will use Ethernet communication to plc. My problem is not all I/O slave hmi tags defined in panelbuilder32 can be seen when browsing Online tags from Factorytalk Linx. Can you help how to map the devicenet tags to PLC tags using the I/O address? Devicenet module is in Slot 9.

Upon checking the Scanlist from RSNetworkx, I/O parameters is Polled with 128 bytes in Input and 128 bytes in Output.

[Newbie123 0]

Here are some screenshots for reference.

Thank you in advance for your help! :)