Posted 23 Nov 2021 How to program Feet/Min. rate meter on CP1L PLC and display on HMI ? Share this post Link to post Share on other sites
Posted 23 Nov 2021 I can think of about 6 additional pieces of information that would be needed for anyone to help you. Share this post Link to post Share on other sites
Posted 23 Nov 2021 Hi photoltaic Thanks, the encoder connected to 0 input of plc and 807 pulses per foot are generated. Share this post Link to post Share on other sites
Posted 23 Nov 2021 You'll want to use PRV2(883) function. Set it for RPM calculation mode and assign 807 as the pulses per revolution Share this post Link to post Share on other sites
Posted 23 Nov 2021 Thanks. So you mean PRV2(883) #0000 #807 DM0000(for display) ? Share this post Link to post Share on other sites
Posted 23 Nov 2021 37 minutes ago, JASin said: Thanks. So you mean PRV2(883) #0000 #807 DM0000(for display) ? That looks right yes Share this post Link to post Share on other sites