Posted 15 Oct 2021 Hello Guys, I have a problem with my Screenbuttons, if i push them, my drive moves only an Impulse. I see on the Simple-Motion Module that the Signal is during pushing the screenbutton is active, but the Axis moves only an Impulse. In example M400 is for drive the 2nd Axis to the right side and M405 for the left side. My Hardware is: FX5U, GOT2000 (GT2505HS-VTBD) Share this post Link to post Share on other sites
Posted 15 Oct 2021 (edited) For the screen you can define the button function as momentary (as long as the buttons is pressed) ON - OFF or Toggle But what is the function of M40xx joging, moving to a postion .... What does the PLC program look like ? Edited 15 Oct 2021 by Gambit Share this post Link to post Share on other sites
Posted 15 Oct 2021 (edited) OK, the Function was Joging but i found the problem, the problem was the other part of my Program, i deleted some functions and it works now.Thanks Gambit!!! Edited 15 Oct 2021 by Levent1970 Share this post Link to post Share on other sites