Missing Option in GT Designer3 V1 for GS2107-WTBD-N

[DWIM 1]

Hello everyone

I placed a Alarm Display (User) on a Screen. The Alarms are correctly displayed. So far so good.
If I touch an alarm the cursor appears (the alarm is selected) works OK also.
Problem:
The cursor on a selected alarm is white and I can not read the error "underneath" it. If i move the cursor to another alarm, the previous alarm is visible again.

I consulted the docs and realized a missing option "text color on cursor display" (see attached picture).
There it should be possible to "XOR" or "Inverse" the color.
Well, yes I have a "Simple" series model, but it seems like an error in the GT Designer Software.
What do you guys think about this? Is there a place where i can report bugs to Mitsubishi?

Thanks
DWIM
 

 

 

[DWIM 1]

OK I found the solution:

The option is not there. I accepted that as a fact. So I tested some styles and colors, and all of a sudden I could read the text!

I had the following "wrong" configuration to highlighting the item, red as background color, white as cursor color and black as text color. 
If one places the cursor (select) a line, the HMI changes the red to white and inverses the black to white ==> invisble text.

Doh....

Case closed...