"CC-LINK-IE-FIELD" Remote Device IO Communication

[KCRP 0]

Hi, I am using IQ-R Series "R16ENCPU" With Inbuild CC-LINK IE FIELD "RJ71EN71" and attached CC-LINK "RJ61BT11".

Problem is, Even though my remote IO cards are in Online connected with masters, I cannot able to On/OFF Remote Device station IOs in CC-Link IE FIELD network. But CC-Link Normal is working fine.

Refresh settings and Network Config Settings are done, Below attached the pics for reference.

I cannot able to find the problem, Can anyone help me in this.

 

[Gambit 324]

first I see that in the CC-Link IE Field network the inputs are refreshed to X2000 but i think you want to use X200. 

So if you activate Y200 - Y21F no output light turns on on the first slave of the IE Field network ?

Edited 10 Sep 2021 by Gambit

[KCRP 0]

Hi @Gambit ,Thanks for a reply. Actually my refresh settings is X2000 AND Y2000 and I tried with X2000 and Y2000 i never get a ON/OFF signal. Then i change to X200 and Tried also no signal.

[KCRP 0]

Initially i configured Refresh setting for CC LINK IE FIELD is X2000 & Y2000 also cannot get signal

 

[KCRP 0]

See below Pic for the Communication in between the remote devices.

[DaMro 2]

Hello

Did you set up modules parameter: Initial parameter setting to "Without initial processing" ?