Posted 6 Aug 2021 Hi, I wonder if it was possible to use FactoryTalk View ME to design project for SLC5/03? The hardware connection uses serial DF1 Could be any limitations due to CIP network protocol? Any suggestions? Share this post Link to post Share on other sites
Posted 6 Aug 2021 I would expect it to work. But slowly. Share this post Link to post Share on other sites
Posted 7 Aug 2021 We have plenty of PvP's talking to SLC 503's and 504's in the plant I work in. Alan Share this post Link to post Share on other sites
Posted 8 Aug 2021 On 8/7/2021 at 5:46 AM, alan_505 said: We have plenty of PvP's talking to SLC 503's and 504's in the plant I work in. Alan Whta is Pvp's? Share this post Link to post Share on other sites
Posted 9 Aug 2021 Yes PvP = Panel View Plus, and out talk to the SLC's via RS232 DB9 ports and cables either with DF1 or DH-485. Alan Share this post Link to post Share on other sites
Posted 10 Aug 2021 The older PanelView Plus HMIs (v6 and earlier) have option modules that allow them to communicate via DH+, RS-232, etc. The current series (PanelView Plus 7) does not support communication via any method other than Ethernet/IP. Share this post Link to post Share on other sites