SLC5/03 RSLogix 5000 Issue

[Qasem 1]

Hi

I have established serial DF1 full duplex connection from my laptop to the SLC5/03. I am using Serial Null modem cable and it works because I can make the auto configuration in RSLinx Classic and I can see the SLC5/03

However when I launch the RSLogix5000 there is no chance to select the path to the SLC even though it is there in the list

 

Any help?

[pturmel 157]

Is "RSLogix 5000" typo?  You need RSLogix 500, not 5000.

[Qasem 1]

10 hours ago, pturmel said:

Is "RSLogix 5000" typo?  You need RSLogix 500, not 5000.

I do not have the RSLogix500 but I installed the RSLogix5000. Is there any way through?

[alan_505 24]

To get online or look at SLC files you will need RSLogix500, RSLogix5000 is for ControlLogix and CompactLogix not SLC processors.

 

 

Alan

[Qasem 1]

On 8/5/2021 at 1:40 PM, alan_505 said:

To get online or look at SLC files you will need RSLogix500, RSLogix5000 is for ControlLogix and CompactLogix not SLC processors.

 

 

Alan

Could RSLogix Micro starter do the work?

[pturmel 157]

6 hours ago, Qasem said:

Could RSLogix Micro starter do the work?

No.

[Qasem 1]

22 hours ago, pturmel said:

No.

RSLogix5 Pro may be?

[pturmel 157]

5 hours ago, Qasem said:

RSLogix5 Pro may be?

No.

RSLogix 500 for the SLC family + 176x MicroLogix.

RSLogix Micro for 176x MicroLogix only.

RSLogix 5000 for ControlLogix and CompactLogix.

RSLogix 5 for PLC-5 family only.

CCW (Connected Components Workbench) for Micro8xx family only.

You must use the correct programming software.

[Qasem 1]

20 hours ago, pturmel said:

No.

RSLogix 500 for the SLC family + 176x MicroLogix.

RSLogix Micro for 176x MicroLogix only.

RSLogix 5000 for ControlLogix and CompactLogix.

RSLogix 5 for PLC-5 family only.

CCW (Connected Components Workbench) for Micro8xx family only.

You must use the correct programming software.

Thanx for the info. appreciated