Posted 24 May 2021 (edited) Hey. I have a PLC program I need to customized to a diffrent PLS (CP1L). PLS ony support CX-programmer. I miss the I/O list. Are there a easy workarund here, to find out the IO list ? Best regards Wictor Edited 24 May 2021 by Wictor Share this post Link to post Share on other sites
Posted 24 May 2021 The IO addresses are printed on the covers of the CP1. You will see '0CH' '1CH' on the top cover and '100CH' '101CH' on the bottom one. And next to them 0, 1, 2, etc.. that's telling you where the IOs are mapped. 0CH + 0 = 0.00. 1CH + 10 = 1.10. Inputs start at 0.00 and outputs start at 100.00. You can see the straight list in Programmer by clicking this button: If you want to see the actual value: 1 person likes this Share this post Link to post Share on other sites
Posted 25 May 2021 viman did a good job about explaining the base IO, as for any cards you want to add a good reference is section 4-2 here: https://assets.omron.eu/downloads/manual/en/w471_cp1l_cpu_unit_(including_cp1l-j)_operation_manual_en.pdf Share this post Link to post Share on other sites