helgimarg

Omron C200H CN225 Cable

10 posts in this topic

Hi Guys

I have a old setup, a C200H with TV101's. I have the data settings controller (C200H-DSC019 as well, but I dont have the cable between them.

The cable part number is C200H-CN225 or C200H-CN425

https://www.edata.omron.com.au/eData/PLCs/C200H_SIOU/W241-E1-03A.pdf

Does anyone here have drawings for the cable, or have the cable and can help me out with it?

thanks!

Share this post


Link to post
Share on other sites

Interesting, Omron is usually really good about documenting their cables. My search didn't turn up anything. This one would be very difficult to make without the proper tools.

I have one here on my desk. What do you need?

2 people like this

Share this post


Link to post
Share on other sites

Assuming your cable is not completely destroyed, the order is the same on both ends.

Main Color/Sqare Dot

PNK/BLK

PNK/RED

YEL/BLK

YEL/RED

WHT/BLK

WHT/RED

GRY/BLK

GRY/RED

TAN/BLK

TAN/RED

1 person likes this

Share this post


Link to post
Share on other sites

Hi Io_RACK

Thanks for that! You are a life saver for this. According to Omron they never had the Pinout available for this cable, which is very strange, as usually they do.

The Cable has actually been cut, so I have the IDC plug, but not the plug for the TV101.

Attached is a drawing of both plugs, and pins, could you trace the pinout for me please? Also, do you happen to know what plug it is that goes into the TV101?

b7MYbLs

https://ibb.co/b7MYbLs

Edited by helgimarg

Share this post


Link to post
Share on other sites
PNK/BLK 9
PNK/RED 1
YEL/BLK 10
YEL/RED 2
WHT/BLK 11
WHT/RED 3
GRY/BLK 12
GRY/RED 4
TAN/BLK 13
TAN/RED 5

The only nomenclature on the plug is "XS" and "J016A". I'll be honest, I checked the first 4 wires then assumed the rest.

 

Share this post


Link to post
Share on other sites

Thank you for this!

My IDC plug actually only has white wires, would it be safe to assume that it would be in this pin out order?

Wouldn't want to risk it as these are soo old and difficult to get a hold off.

IDC to J016A

10   PNK/BLK 9
9  PNK/RED 1
8   YEL/BLK 10
7   YEL/RED 2
6   WHT/BLK 11
5   WHT/RED 3
4   GRY/BLK 12
3   GRY/RED 4
2   TAN/BLK 13
1   TAN/RED 5

Oh, and btw the J016A plug is from Fujitsu  FCN-361J016-AU

Thanks again! 

Edited by helgimarg

Share this post


Link to post
Share on other sites
  Fujitsu   IDC
PNK/BLK 9 10
PNK/RED 1 9
YEL/BLK 10 8
YEL/RED 2 7
WHT/BLK 11 6
WHT/RED 3 5
GRY/BLK 12 4
GRY/RED 4 3
TAN/BLK 13 2
TAN/RED 5 1

Your safest bet would be to buy a cable. It looks like it's non-stock yet still available at some electronics suppliers.

 

Share this post


Link to post
Share on other sites

Thanks! Yes I was hoping to find online, but I havent been able to find that many, only a few for around $400.....

Share this post


Link to post
Share on other sites

Hi Again

I have gotten all the plugs, but not even able to power the unit on.

do you know which pins are for the power?

thanks

Share this post


Link to post
Share on other sites

I do not. I cannot find it documented in any of the device manuals either.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now