FX-2NC-32MT PLC program Download

[Sohel.ahmed.uk 0]

Hi,

There are two machine in the factory controlled by Fx 2nc PLC. One machine control part is not working. It could be for battery failure. But the other one is working properly.

In this case can I change the battery? 

After that,  is it possible, I upload the program from the good machine PLC and download it to the other machine PLC?

Regards

Sohel Ahmed

[Crossbow 295]

If the machines are identical, you may be able to upload the program from one and download it to the other.  GX-Developer or GX-Works2 should be able to talk to that PLC.

[Sohel.ahmed.uk 0]

19 hours ago, Crossbow said:

If the machines are identical, you may be able to upload the program from one and download it to the other.  GX-Developer or GX-Works2 should be able to talk to that PLC.

Thanks.

What the communication cable require for that

Regards

Sohel Ahmed

[Crossbow 295]

SC09