E200 HMI PROGRAMM UPLOAD

[SUPERVISOR 3]

Hello Guys

This is my first time in MRPLC. I have a machine working with old E200 HMI and it lost its operating programm. I tried to upload its programm but it is G1 file type and couldnt upload using GT DESIGNER3 as I cant find this old model in GOT type. Also couldnt comunicate using Serial CAB 5 cable. Any help is highly appreciated.

 

Regards

[Gambit 324]

You can't program this with GT designer. You need E-designer.

The programming cable in the help file in the software.

I think it was like this but you should be able to find it in E-Designer help
PC side HMI side

2 - 2

3 - 3

5 - 5

6,4,1 connected on PLC side

7,8 connected on PLC side

 

Here is a video of the software. I don't know if you should trust the download link though. Better to get is via your Mitsubishi Dealer

Edited 24 Mar 2021 by Gambit

[SUPERVISOR 3]

Hello Gambit. Thank you for your soft reply. The thing that the machine supplier sent me programm but mentioned it will not work exept on GT WORKS 3. I opened the file on GT DESIGNER 3 but couldnt comunicate to HMI. I guss I need to convert file from G1 file type to mpa but dont know how. Looking forward your help.

 

Thanks in advance.

[Gambit 324]

Than you have to contact the machine supplier again because GT designer is for GOT and E designer for E-terminals.
There is a way to convert E-designer projects to GOT but not vice versa.

 

The have to have an. MPA file for the E200 

Edited 24 Mar 2021 by Gambit

[SUPERVISOR 3]

That I tried already but unfortunatly couldnt get in contact with them again because they closed before one year. 

Thank you for your kind help. 

Will keep updating about it.

[IamProgrammer 0]

I have go through your problem I think you should Contact me for your solution

 

Edited 7 May 2021 by IamProgrammer