Cpm1a-40cdr-d-v1 Programming cable

[Reza balaei 0]

hi guys

i have Cpm1a-40cdr-d-v1 cpu that i need to go online for troubleshooting

i can not buy a programming cable because in my area there is no retailer and this model is very old.

is there a pinout in which i can build a cable for connecting my cpu to cx programmer using serial port?

thanks in advance

[photovoltaic 121]

If there is a CPM1-CIF01 currently going to the Peripheral port (has a DB9 connector) then you could make a cable. If it is just the PLC on its own then you need the CQM1-CIF02.

[Reza balaei 0]

thanks for your quick response

can CQM1-CIF02 be built?

i mean is it just a cable or has some intermediate circuits

 

[photovoltaic 121]

No, it has a converter built into the cable. There is a cable manufactured by a different company for this PLC that you may be able to get in your area: USB-CIF02

These are often on ebay and Amazon etc.