Posted 24 Feb 2021 Dear Experts Would need your support in understanding instructions used in "Mitsubishi GX Works 3" with examples Regards Share this post Link to post Share on other sites
Posted 24 Feb 2021 (edited) Im not an expert but please be more specific. data types are called devices. M device is a bit. D device is a word. T = timer. If you click the help tab and look in the manuals its all explained with pictures. Edited 24 Feb 2021 by JustinSmith Share this post Link to post Share on other sites
Posted 25 Feb 2021 Pretty much every instruction in GX Works3 is covered in the help files (pick one and hit F1) or the programming manual for each PLC. There are hundreds of them, so you need to be a lot more specific what you are asking for. Share this post Link to post Share on other sites
Posted 26 Feb 2021 On 2/24/2021 at 8:47 AM, Shankar Rao said: Sorry for not having provided adequate details Please look at the screenshot as unable to upload project . Please let me know meaning of highlighted (in Blue) instruction as earlier tried by selecting instruction and pressing F1, help screen did not pop up. I am able to understand other instructions so far in the project, Share this post Link to post Share on other sites
Posted 26 Feb 2021 It is Melsoft series GX developer. Unable to understand meaning of instruction (T41)K20, Tried by selecting this instruction and pressing F1, but Help screen did not pop up Share this post Link to post Share on other sites
Posted 26 Feb 2021 Please confirm if instruction (T41)K20 means Timer number 41 for 20 seconds & if yes then whether it is off delay or on delay timer Share this post Link to post Share on other sites
Posted 26 Feb 2021 Al timers are on delay in GX Developer. That is timer 41. As for the preset, it is sometimes different by PLC model, but typically that would be 2.0 seconds. Share this post Link to post Share on other sites
Posted 27 Feb 2021 Thank you so much for clarification Share this post Link to post Share on other sites