How to Wire 1762-IF20F2 Output to Drive

[Dingo951 0]

I'm trying to control the speed of a drive through a 1762-IF20F2 output and the manual has very little information on how to wire this set up. I'm not sure if the module has its own power supply but I imagine I have to use the drives power supply.

 

Any help is greatly appreciated.

[Joe E. 259]

The Analog output power is produced internally to the module. You would connect the module's COM terminal to the drive's analog common and the chosen output to the drive's input. What kind of drive is it? Are you using a voltage or mA signal?

[Dingo951 0]

I'm using voltage, the drive is an old Seco Mentor ii dc drive.

[Joe E. 259]

Ok. I've never used (or heard of..) that drive, but its manual should show its analog input terminals. A quick Google seems to say that it's a Control Techniques drive but the manual download links I found don't work. Do you have a copy of the manual?

[Dingo951 0]

Dang, it wont let me upload anything. I will try what you suggested this morning, it  makes more sense now knowing the module power is internal.