Posted 28 Jan 2021 CX-Supervisor Version 3.50(7) on Windows 7. I've just had a vendor add a function to a HMI. It's a single button to save the recipe and it's near the bottom centre of the screen. Sometimes it works. Sometimes it works if I slide my finger around on it. Usually it doesn't work. It always works if I use a VNC viewer and press the button remotely. The PC has two touch monitors (on VGA splitter). Both monitors have the same problem. If I run PBrush (Paint) I can draw all over that area of the screen without missing a pixel. Has anyone ever seen anything like this before? And, more importantly, how did you fix it? Thanks. Share this post Link to post Share on other sites
Posted 3 Feb 2021 Hiya. First, when I've seen something like this it is when a small picture is placed over the button and the picture receives the presses instead of the button - if you click the corner it works OK . For those in this situation the solution is easy - if you make the picture 'unclickable' the presses will pass through to the button underneath. Just add an "Enable" animation to the picture with Expression: FALSE so that it is never enabled Second thought though about if this is touch screen or driver etc, could be good test to display $MouseX and $MouseY on screen these are updated every click so you can see if CX-supervisor is actually getting all those clicks. Regards, BB Share this post Link to post Share on other sites