Data separation in CP1E

[Ali Azizi 0]

Hi all. I have a question regarding data transfer.

Example: When i scan barcode using RXD, i transfer to D10 - D17. So in D10 will have 2 alphabet i.e (G5). Is there a way to separate the alphabet (D20=G,D21=5) Thank you (CP1E N40)

[IO_Rack 178]

Have a look at the ASC(086) ASCII Convert instruction.

[Ali Azizi 0]

On 1/26/2021 at 9:05 PM, IO_Rack said:

Have a look at the ASC(086) ASCII Convert instruction.

Is it possible to move G5 in d4010 to G in d4020 and 5 in d4021. Tq

[IO_Rack 178]

Sorry, I give you bad information. The CP1L does not have the extensive ASCII instructions. No problem though, you can use the MOVD(083) instruction. 

[Ali Azizi 0]

On 1/29/2021 at 9:03 PM, IO_Rack said:

Sorry, I give you bad information. The CP1L does not have the extensive ASCII instructions. No problem though, you can use the MOVD(083) instruction. 

Got it! Thanks a lot!