Posted 11 Jan 2021 I have a Siemens HMI 6AV2 124-0MC01-0AX0 in my machine. I want to clone the display on the HMI to PC/Laptop. My question is: 1. What software that I need for this task? 2. What kind of interface that I need between the HMI and PC/Laptop (for example ethernet cable, etc)? 3. Do I need to communicate with PLC connected with HMI or can I just connect with the HMI? Thanks in advance for the answer. Share this post Link to post Share on other sites
Posted 11 Jan 2021 (edited) The TP is connected to the PLC via Profinet. (look at the back of your TP to see the connections) So you can connect the laptop to the PLC via Ethernet interface. You will require TIA Portal / WinCC runtime software and the TP Project. The laptop will need an IP address in the same range as the TP & PLC Edited 11 Jan 2021 by Moggie Share this post Link to post Share on other sites
