Posted 18 Dec 2020 Hi, Has anyone here has experience of using Fernhill SCADA with Mitsubishi PLC FX3U Series? I want to monitor PLC's data in real time through FX3U-ENET-ADP ethernet adapter using Fernhill SCADA software. Thanks in advance for the answer. Share this post Link to post Share on other sites
Posted 23 Jan 2021 Hi, I've used Fernhill SCADA with an FX3U-ENET and an FX3U PLC and the combination works well. To work with Fernhill SCADA you need to set a port on the FX3U-ENET-ADP to use UDP with MC Protocol. If you have any issues contact Fernhill Software via their support email Regards Share this post Link to post Share on other sites
Posted 25 Jan 2021 On 1/23/2021 at 10:56 AM, bradfordrg said: Hi, I've used Fernhill SCADA with an FX3U-ENET and an FX3U PLC and the combination works well. To work with Fernhill SCADA you need to set a port on the FX3U-ENET-ADP to use UDP with MC Protocol. If you have any issues contact Fernhill Software via their support email Regards You need to keep in mind the capabilities of the FX3U-ENET are far more than the FX3U-ENET-ADP. It's not the same module. Share this post Link to post Share on other sites