CP1E PWM out to CP1E Input?

[Arbon 0]

Hi,i have omron cp1e and i need connect cp1e's pwm output to cp1e's input ,what can ido? for input wich instruction i can use?

[IO_Rack 178]

Have a look at CP1E CPU Unit Software User’s Manual(W480). There are lengthy sections on High Speed Inputs and Pulse Outputs.

- Make sure you have the correct CP1E. Relay outputs will not perform Pulse Output.

- Use the P_ER (Instruction Error) contact after your pulse output instructions. I've found this is helpful when determining if I have a data (programming) issue or a wiring issue.

- Use very slow pulses at first. You can watch the outputs LEDs turn ON and OFF. This can also be helpful when troubleshooting.