Posted 2 Dec 2020 (edited) Hello I have a machine with a FX2N plc. problem is that it has lost its program due to battery is dead. I found ladder papers inside electrical cabinet. and i have tried to make program in GX Developer 8 But i cannot make the STL (step ladder) work. I need to make a open contact with lets say S20 STL And from S20 - S32 i need to make STL. And the end of S32 i need to make RET instead of Coil Y0 What am i doing wrong? Here is link to file https://steeltek549-my.sharepoint.com/:u:/g/personal/leon_steeltek_dk/EUeQcrh7HMRGjiUiGWuWusMBsKgBbxvPEJEILjd9MzH8eQ?e=lASjfA Thanks in advance Leon Edited 2 Dec 2020 by Vidoco Share this post Link to post Share on other sites
Posted 3 Dec 2020 @Vidoco Could you show us some example of STL on your ladder paper? Because we need to know what result you need. Share this post Link to post Share on other sites
Posted 3 Dec 2020 4 hours ago, Wasan said: @Vidoco Could you show us some example of STL on your ladder paper? Because we need to know what result you need. Hi thanks for answer here is link to photos to show you https://steeltek549-my.sharepoint.com/:u:/g/personal/leon_steeltek_dk/EfHExvBJVHdMkgwEC3aBkJkBlB5-3LXwOei4Ckz8zO2tgg?e=wjjVFW I need to make this [S20 STL] but i cannot do it. Share this post Link to post Share on other sites
Posted 3 Dec 2020 You don't need to type in |STL|, just the S20, So F5 to get | | then enter S20 Steve Share this post Link to post Share on other sites
Posted 3 Dec 2020 Okay but the problem is that I cannot add the RET instruction at the end of S32. Share this post Link to post Share on other sites
Posted 3 Dec 2020 13 minutes ago, nehpets said: You don't need to type in |STL|, just the S20, So F5 to get | | then enter S20 Steve Here is pictures off Paper ladder I cannot add RET instruction. see pictures in this link https://steeltek549-my.sharepoint.com/:u:/g/personal/leon_steeltek_dk/EWWXbQ8D4cVKj2llwDO91cEBobNY6LjZBnlJ3CR83wPFhA?e=5EW45J Share this post Link to post Share on other sites
Posted 4 Dec 2020 (edited) Problem solved with the help from Wasan I cannot add file to forum. but Wasan helped me to get Step ladder work. Just ask me if any of you have same problem. Edited 5 Dec 2020 by Vidoco Share this post Link to post Share on other sites