modicon 484 automate

[goodman20003 0]

Hi all;

we have  modicon 484 automate, and we want to read/ record and make a backup  of  the exciting  program from CPU ,  but ower console P180 is Breakdown
I would like to know if there are is  solution on how to read  the program using compteur and what is the   software and cables required.  

[Wasan 59]

I have check that on internet that they use Taylor 484 Software with J470 cable for interface with them.

 

[Modiconbob 2]

Yes, there are several options available.Wasan is correct, and this unit/technology is over 40 years old!

The P180 was never able to record/copy the program, it was only a programming console. The P190 had both capabilities.

To back up the existing program, it will require a J470 interface, a cable and PC/computer that is capable of running a DOS program. I have all of that equipment and we perform these operations still to assist clients in upgrading their processes.

You may contact me directly via email to discuss some options to get this operation done for you.

bobculley@deltaautomation.com

 

Thanks,

ModiconBob