GOT2000 button enabled/disabled state

[_Pavel_ 0]

Dear all,

please give an adviсe... I take Mitsubishi HMI for the first time - and cannot find how to implement a general button function:
A general button has ON/OFF states, but as well it usually has to have ENABLED/DISABLED states
(DISABLED - is grayed and cannot be pushed to ON state).

Could you please advise how to implement that properly? I worked with a number of different panels, this function is usually available, but I cannot find how to do that with GOT2000.

Any advice is pretty much appreciated.

Edited 22 Jul 2020 by _Pavel_

[AndreasW 21]

hi _Pavel_,

inside the the button properties you have to set the trigger device to enable the button, you can use a ON/OFF Trigger.
This will enable or disable the button, and the button can't be pushed if the trigger condition is not set.
To to gray out the button visually you have to set the checkbox for 'show button in non operating state' in the extended
property tab. Then you can change the appearance of the button for the 'non operating state', just assign an grayed
button image inside the style tab.

 

[_Pavel_ 0]

Dear AndreasW,

thank you!