Cx designer not supports test simulation with cpm2a/cpm1a

[MuhammadRiyas 0]

Pls any one help me to simulate my omron HMI program with CPM 2A PLC 

Means help me to communicate cx designer with CPM 2A plc

Or with NT- series  support tool

[Crossbow 295]

What are you trying to do?  CX-Designer is for the NS-Series HMI, not for the PLC.  And NT-Series Support Tool is for the older NT-Series HMI.  To talk to the PLC you need to have CX-Programmer.

[IO_Rack 178]

On ‎6‎/‎3‎/‎2020 at 7:09 AM, MuhammadRiyas said:

Pls any one help me to simulate my omron HMI program with CPM 2A PLC

I'm fairly sure you can do this. Simulate CX Designer with a CPM2A (real PLC).

What you can not do is simulate a CPM2A from CX Programmer.

What model HMI do you have?