Posted 29 May 2020 Dear All, Need your help. I have problem with plc cj2m cpu35. After power trip plc error. Err HE Ip 01..what is mean? plc also connected with one pc using ethernet cable. Any suggestion need to do... Share this post Link to post Share on other sites
Posted 29 May 2020 See attached from the W465 manual 1 person likes this Share this post Link to post Share on other sites
Posted 29 May 2020 can you explain more detail cause I'm not to understand due to just started used omron plc. not familiar with omron plc Share this post Link to post Share on other sites
Posted 29 May 2020 What is the IP address of the cpu? What other devices are connected to the network? Share this post Link to post Share on other sites
Posted 29 May 2020 plc connected with 1 pc inside the control room... I'm not sure with plc address... I need to see what is current node switch is selected... for ur advice what I need to do now.. online first with cx programmer and check error log or others, or change the cpu first or any others idea. Share this post Link to post Share on other sites
Posted 29 May 2020 You should be able to connect to the plc over USB. This would allow you to check the error log. Share this post Link to post Share on other sites
Posted 29 May 2020 dear sir.. ok.. noted.. I will do first.. and also get all information related with the problem Share this post Link to post Share on other sites