Posted 13 May 2020 We are looking for PLC software for a Siemens simatic TI305 02B CPU TI335 37 with RS-232C Share this post Link to post Share on other sites
Posted 13 May 2020 my recommendation is to contact manufacturer Share this post Link to post Share on other sites
Posted 13 May 2020 I thin Automation Directs Direct logic software will work with it. Page 7 of this PDF would say so, not sure what hardware you will need, I think there is an interface module that screws to the front of the PLC for RS 232. https://cdn.automationdirect.com/static/specs/directsoft6specs.pdf Share this post Link to post Share on other sites
Posted 13 May 2020 Did you know APT from Siemens? It can be your best choice. Not so common, but excellent programming software for process control. Share this post Link to post Share on other sites
Posted 17 May 2020 Here is a link to the cable pinouts for TI 305 PLCs: https://cdn.automationdirect.com/static/specs/directsoftcables.pdf Use D3-DSCBL-1 Also you can use either TISOFT 305 or Directsoft from Automation Direct to program the CPU. Share this post Link to post Share on other sites