NB-designer doesn't show bit switches

[olivier123 0]

Hello everyone,

I am creating an HMI in NB-designer, but I can't use the bit switches properly. I can use the Local Bit memory, but when I switch to W-bit memory, all the switches will disappear. Does anyone know how to solve this problem?

Thanks,

 

[Michael Walsh 241]

One way that the buttons disappear is if you don't have communications established.  The other way would be program issues, but it is difficult to tell that without the program.

[olivier123 0]

I don't have a communication yet, so that could be the issue. Still having issues with the communication. I have used this  https://www.myomron.com/index.php?action=kb&article=1539  omron article to set my communication, but i still get the PLC no response error on the HMI. Any tips to solve that specific problem? After solving that problem I can take a look whether the communication resolves the problem with the bit switch. Btw I have put the PLC0 IP address in the PLC, so that's definitely not the problem

 

EDIT: I changed the default gateway to 0.0.0.255 and the communication worked. I'll take a look if the bit switches will also work

 

 

Edited 4 May 2020 by olivier123

[Michael Walsh 241]

I am surprised that it even lets you put that in for a default gateway.  That is definitely an invalid IP Address.

[olivier123 0]

15 hours ago, Michael Walsh said:

I am surprised that it even lets you put that in for a default gateway.  That is definitely an invalid IP Address.

I searched around on the internet and I noticed that, so I'll change it to a valid address

[yadav.parbhakar@gmail.com 0]

On 04/05/2020 at 2:46 PM, olivier123 said:

Hello everyone,

I am creating an HMI in NB-designer, but I can't use the bit switches properly. I can use the Local Bit memory, but when I switch to W-bit memory, all the switches will disappear. Does anyone know how to solve this problem?

Thanks,

 

I also experienced same problem but my problem was solved by changing address like instead of using address for W bit like 90.1, 90.2, 90.3 I used 90.1, 90.6, 90.11 by this it solved my problem of disappearing of bit switch.