Posted 22 Apr 2020 Can I have both 0-10 and 4-20mA inputs on the same module???? I have two sensors that output 0-10 and a Ultrasonic level detector that outputs 4-20mA but only one module. Share this post Link to post Share on other sites
Posted 22 Apr 2020 Hi Mike, yes just select the correct format for each channel under I/O configuration and have the load resistor in the top on the module ON for your 4-20mA signals. Here are details on how to do it. https://www.theautomationstore.com/rslogix-500-analog-circuits-wiring-and-programming-0-10vdc-4-20ma/ 1 person likes this Share this post Link to post Share on other sites
Posted 22 Apr 2020 Download and read the 1762-IF4 manual. GTS (Google That Stuff) and find the pdf. Specifically, page 12. There you'll see the dip switches are configurable for current or voltage, on a per channel basis. Then, as Tim's link shows, you need goto the advanced configuration of the module to select either -10 to +10V (default) or 4-20mA. 1 person likes this Share this post Link to post Share on other sites